Editor’s Note: One of the perks of being an RBR Premium Member is the ability to send us a direct question using the Ask RBR a Question form at https://www.roadbikerider.com/ask-rbr-a-question. (You can find the link anytime you need it in the Premium Members section, upper right of any page on the site.) Oftentimes, the question is…
By Jim Langley Back in early September, a few weeks before cycling’s biggest new product introduction every year at the Interbike International Expo, I wrote, “As we do every fall before the show, John Marsh and I have been predicting what we might see, and a funny thing happened. We both expressed concern…
By Jim Langley Last week in Part 2 of this series, we covered the basic tools and setup for working on a wheel on which the spokes have lost their tension. This week, we’ll finally commence retensioning and truing the wheel. Let’s get going! Tightening the spokes Luckily, when wheels lose spoke tension…
By Jim Langley Last week in Part 1, we learned about Pennsylvania RBR reader Randy’s rear Shimano wheel, which was rubbing the brake pads on each pedal stroke because the spokes had loosened. This week, I’ll explain how anyone with some basic mechanical aptitude can go about fixing a loose wheel like Randy’s….
By Jim Langley This week’s topic (the first of a 2-parter) evolved from an RBR Premium Member’s email. (We gladly offer our direct, personal advice to our Premium Members.) Randy from Pennsylvania wrote about a fairly common wheel issue: “When I ride out of the saddle on hills, my wheels laterally flex and…
