The Crucial First Ride

Make Sure a Newcomer Returns for a Second Ride!

By Ed Pavelka of www.RoadBikeRider.com

If you’ve been in this sport for long, you’ve probably seen it happen. An enthusiastic person shows up for his (or her) first ride with the local club. He’s a bit intimidated by the lingo he overhears, but that’s nothing compared to his anxiety about what to do and how to do it once the ride gets underway. Before long he’s trailing behind, spooked by the interplay of bike wheels and feeling as wanted as an IRS agent in a Super Bowl pool.

Do you think this guy will be back for another ride next weekend? Not likely.

It’s unfortunate, but experienced cyclists are often pretty tough on newcomers. It may be intentional because of the risks that an unskilled bike-handler creates for everyone, but more often it happens because we forget how much a novice cyclist doesn’t know. If you think about it, riding a bike isn’t all that easy.

Gero McGuffin has thought about it. She was 30 years old before she climbed onto a bike the first time, so she vividly recalls how intimidating beginning can be. Now a polished cyclist and the wife of cycling author Arnie Baker, M.D., Gero enjoys helping new riders get started in a way that ensures they’ll have a great time and come back for more.

Gero’s recommendations can be used anytime we’re riding with a newcomer. If you’re a beginning rider, these tips can help you have a more positive experience as you learn the sport.

Be Gentle

Gero’s core advice is useful when helping any new rider: “Treat them kindly, go slowly, and keep your expectations low. Give it your best shot, and you will help a person become a cyclist for the rest of their life.”

Now, here’s a digest of her specific tips.

• Don’t project your own cycling goals. They are much different for an experienced rider compared to a new rider. Let the person evolve. If he’s interested only in casual cycling, let him be. If he’s interested in fast recreational riding or racing, encourage him – but explain the dangers of trying to advance too fast before developing a foundation of skills and fitness.
   

• Take nothing for granted. Err on the side of proceeding too slowly and explaining too much. A new rider has lots of knowledge gaps.
   

• Watch your language. If you’re saying things like “upshift one cog” or “feather the brakes,” a newcomer isn’t going to understand and may be too embarrassed to admit it.
   

• Be polite. Even if made in jest, negative actions or comments can have a long-lasting impact.
   

• Ask the person about his concerns. These could include fear of traffic, fear of being left behind, fear of riding close to others, fear of the saddle, and even fear of wearing form-fitting Lycra clothing. Then work with the person to resolve the specific worry.
   

• Keep costs in perspective. Don’t make the person feel that he has to spend a lot of money to be a cyclist. Explain, however, that some things are a smart investment. For instance, if he’s in the market for a new bike, it should be the best quality he can afford. It should have a triple crankset for plenty of easy gears if there are hills in the area. He should buy a good saddle, cycling shorts with a padded liner and a helmet.
   

• Simplify the pedals. New cyclists are often afraid of toe clips and straps or clipless pedals. It’s helpful to install platform pedals that don’t require any technique to enter or exit.
   

• Check riding position. A newcomer will master pedaling and handling faster if he’s in a good position. Make sure there is a slight bend in his knees at the bottom of the pedal circle and that the handlebar is within an inch or so of saddle height. To really nail his position, use the guidelines in the RBR article, "How to Perfect Your Position and Technique."

Now We’re Rolling

• Stay off the road. When helping a first-timer learn to ride, use a big sports field or empty parking lot. Keep traffic out of the equation. Next, try park paths or quiet residential streets.
   

• Ride as slow as the beginner. Don’t do anything to make him go faster than his comfort level.
   

• Watch his eyes. Remind a new cyclist that he’ll ride a smoother, straighter line if he looks 10 or more feet ahead rather than directly in front of the wheel.
   

• Watch his grip. New riders are apt to be tense, locking their arms and squeezing the bar with white knuckles. Explain the advantages of flexed elbows and a secure but relaxed grip.
   

• Take away a hand. After starting, stopping, and maintaining a straight line, the next skill to work on is riding with one hand. This is important so the person can signal or reach for his water bottle without swerving. Next, move on to shifting gears – how and when.
   

• Keep it simple. Don’t overwhelm a newcomer with techniques. Let him get comfortable with the basics. As you see skill and confidence increase, add something new to work on.
   

• Stay back. If you ride behind the person he won’t feel like he’s always trying to catch up. Let him set the pace. Don’t ride beside him until he feels confident in his basic riding ability.
   

• Introduce drafting. Explain the advantages of riding behind a wheel, but let the newcomer keep a gap of several feet until he’s ready to move in closer.
   

• Take a real ride. For your first ride in regular conditions, plan a course that has a fun place to stop at the halfway point. It could be a coffee shop or an ice cream parlor. This is a good chance to relax, give pointers, answer questions and provide encouragement.

Make It Good for You, Too

One problem: Too many rides like just described can take some of the fun out of cycling for you. Here is Gero’s advice for how an experienced rider can get some training while riding with a newcomer. She saw her husband use these techniques while he was helping her get started. Don’t do these things during the initial rides. Wait till the newcomer has basic skills but still lacks speed.

The stronger rider can…

• stay in the same gear throughout the ride, spinning on downhills to work on leg speed and pedaling forcefully on climbs to build strength.
   

• assist the new rider up hills with pushes (assuming traffic conditions allow and you have the skill to do this safely).
   

• pedal with one leg at a time to benefit from the technique of isolated leg training.
   

• sprint up the road or to the top of a hill and then ride back, or drop back and then sprint to catch up.

Way to Go!

After a ride, always congratulate the new cyclist on his progress and welcome comments. As Gero notes, “They will have questions that you can hardly imagine, because you have been cycling for so long.”

Finally, encourage the person to ride on his own between rides with you. This will give him the chance to practice skills and gain fitness with absolutely no pressure. Just make sure he doesn’t go off the deep end and turn cycling into a physical and mental chore. This can happen when enthusiasm causes a person to boost their riding too fast. Firmly recommend an increase in time or distance of about 10 percent per week, with at least two rest days.

(A portion of this material was adapted from the coaching manual for the Leukemia and Lymphoma Society, copyright 1999 by Arnie Baker, M.D.)

Receive a FREE copy of the eBook “29 Pro Cycling Secrets for Roadies” by subscribing to the RoadBikeRider Newsletter at www.RoadBikeRider.com. No cost or obligation!

[Back to top]

How to Solve Saddle Sores

By Fred Matheny for www.RoadBikeRider.com

A saddle sore can ruin a ride. Even a tiny zit can begin to feel like you’re perched on a golf ball. Nearly as painful are crotch abrasions caused by shorts that bunch or have an irritating seam.

Even the pros, hardened by thousands of miles in the saddle, fall victim to what cycling author Arnie Baker, M.D., calls “crotchitis.” Fabled tough guys like Eddy Merckx and Sean Kelly had to abandon races when the pain became too great.

Most medical experts say that saddle sores are actually boils caused by skin bacteria that invade surface abrasions. Remedies have come a long way from the era when riders would put slabs of raw steak in their shorts to cushion the abraded area.

Of course, avoiding saddle sores is better than curing them (or ruining a good sirloin). Here’s how:

• Improve your bike fit. If your seat is too high, your hips rock on each pedal stroke and strum your soft tissue across the nose of the saddle. The result is irritated skin and a greater chance of infection. Especially if you suffer from chronic saddle sores, have your position checked by an experienced coach or knowledgeable bike shop person.
   

• Stand frequently. Doing so takes pressure off your crotch and restores circulation. Get in the habit of standing for 15-20 seconds every few minutes. Use natural opportunities such as short hills, rough pavement or accelerating from stop signs. Stand and stretch when you’re at the back of a paceline or group.
   

• Move on the saddle. Sit mostly toward the rear where your sit bones get maximum support and take pressure off your crotch. But also move farther back on seated climbs, and more to the middle when bending low to make good time. Each shift relieves pressure points.
   

• Choose a smooth chamois. Look for shorts with a one-piece liner or one that’s sewn with flat seams. It may take experimenting with shorts brands or chamois types to find the model that works best. Women often do better with shorts designed specifically for their anatomy and that have a liner with no center seam. See the RoadBikeRider.com article, "How to Choose Cycling Shorts."
   

• Select a supportive seat. Saddle choice is crucial. Excessively wide saddles rub your inner thighs. Narrow saddles don’t provide enough support for your sit bones -- your weight is borne by soft tissue that can quickly become bruised and irritated. Thickly padded saddles can press upward between your sit bones, causing uncomfortable numbing pressure. The best choice for any individual rider can only be found through trial and error. Hopefully, your bike shop will have a saddle test-ride program or liberal trade-in policy. See the RoadBikeRider.com article, "How to Find a Safe Saddle."
    

• Lube to reduce friction. To prevent the chamois from abrading skin, apply lubrication before each ride. Try a commercial product such as Chamois BUTT’r or Bag Balm, or simply a light coating of petroleum jelly. Apply a dab the size of a nickel to your crotch before putting on your shorts.
   

• Keep clean. Always wear clean shorts for each ride. If you seem susceptible to saddle sores, you may find it helpful to wash your crotch with antibacterial soap and warm water before lubing up. Dry your skin well first.
   

• Strip quick. After a ride, get out of your sweaty, germy shorts as soon as possible. The environment down there breeds bacteria and encourages them to enter abraded skin. Then shower or clean up with soap and water. Dry well and put on loose-fitting clothing that allows your skin to breathe. For underwear, try boxer shorts. The tight leg bands of briefs cut across the junction of your glutes and hamstrings, right where many saddle sores develop.
   

• Sleep in the buff. It keeps your crotch dry and free of clothing contact for as long as you’re in bed.

If You Get a Saddle Sore

• Medicate it. Besides keeping it clean, treat it with an over-the-counter acne gel containing 10% benzoyl peroxide. Perhaps even more effective is the topical prescription product called Emgel (erythromycin). If a sore is getting out of control, ask your doctor about a course of oral antibiotics.
   

• Rest it. As you medicate a troublesome sore, take some time off the bike to help it heal. It’s far better to lose three days now than a week or more after infection sets in. If you continue to ride on an open sore it may eventually form a cyst that requires surgery.

If You Must Continue Riding

Sometimes you can’t take time off. For instance, you may be on a tour or at a cycling camp.

• Change your shorts or saddle. Your problems are probably isolated in one small area -- a boil or abrasion. Changing your saddle and/or shorts can reduce pressure on the sore and lessen pain.
   

• Use a heavier lube. If you’re getting irritated, apply extra lube or switch to a more viscous one. Many long-distance riders swear by Bag Balm, which was originally made for sore cow udders but is now available in most pharmacies.
   

• Numb it. OTC pain reducers and anti-inflammatories, such as ibuprofen, can help. In extreme cases, pro team physicians will use a topical anesthetic on riders so they can finish a stage race. It’s not recommended for recreational riders because when you’re numb, you can ride yourself into greater damage.
   

• Try Preparation H ointment. No, not for that reason. Prep H works on saddle sores because it shrinks swollen tissue and soothes pain. Apply it five minutes before slathering on your chamois cream and putting on your shorts. Also try a dab on sores after rides to dull discomfort.
   

• Have a donut. In the foot-care section of drug stores, you'll find donut-shaped foam pads in several diameters. They're made for corns but can help you ride more comfortably with a saddle sore, too. Simply place it with the sore in the center of the cutout to relieve direct pressure. The adhesive backing will keep it in place.

Receive a FREE copy of the eBook “29 Pro Cycling Secrets for Roadies” by subscribing to the RoadBikeRider Newsletter at www.RoadBikeRider.com. No cost or obligation!

[Back to top]

How to Solve Painful 'Hot Foot'

By Fred Matheny for www.RoadBikeRider.com

In cycling, it’s known as “hot foot” -- a burning pain in the ball of the foot, perhaps radiating toward the toes. Severe cases feel like some sadistic demon is applying a blowtorch.

Hot foot occurs most often on long rides. It may develop sooner or more intensely on hilly courses because climbs cause greater pedaling pressure. The pain results when nerves are squeezed between the heads of each foot’s five long metatarsal bones. These heads are in the wide part of the foot (the “ball”) just behind the toes.

My worst case of hot foot occurred on a 3,400-mile, 24-day transcontinental ride. With an average distance of 140 miles per day, no rest days and more than 100,000 feet of vertical gain, my dogs were smoking by the third week.

My RBR partner, Ed Pavelka, remembers being in agony near the end of one 225-mile ride early in his long-distance career. It was his first experience with hot foot, and the problem plagued him that season until he changed to larger shoes. Feet always swell on long rides (more so in hot weather), causing pressure inside shoes that normally fit fine.

“Hot foot” is actually a misnomer. It’s not heat but rather pressure on nerves that causes the burning sensation. You’ll sometimes see riders squirting water on their pups in a vain attempt to put out the fire.

Besides tight shoes, another risk factor is small pedals, especially if you have large feet. Small pedal surfaces concentrate pressure on the ball of the foot instead of spreading it the way a larger pedal will. If your cycling shoes have flexible soles like most mountain bike shoes, they’ll be less able to diffuse pressure.

Before Ed figured out his shoe-size problem, he tried to solve the pain with cortisone injections. That’s an unnecessary extreme in most cases -- and it’s not fun to have a doctor stick a needle between your toes. Here are several better solutions.

• Adjust shoe straps. It’s the top strap nearest your ankle that stops your feet from slopping around in your shoes. Tighten it as much as necessary, but keep the strap nearest your toes loose for maximum room.
   

• Use thinner insoles and/or socks. This will give your feet more room to swell without restriction, especially helpful if your shoes are borderline snug.
   

• Re-focus the pressure. Many riders solve hot foot by moving their cleats to the rear by as much as 8 mm. Long-distance enthusiast may go back as far as the cleat slots allow. They might even drill new rearward holes. After using this remedy, lower your saddle by the same amount if you moved your cleats backward 2-4 mm. If more than 4 mm, lower the saddle about half the amount. So, if your cleats go back 1 cm, put the saddle down 5 mm.
   

• Add metatarsal buttons. These foam domes are placed on insoles (or are built into them) just behind the ball of the foot. They spread the metatarsal bones so the nerves running between them aren’t pinched by pressure or swelling. You can find these products in the foot-care section of drug stores.
   

• Switch to larger pedals, for the reason mentioned above.
   

• Buy new shoes. Look for a model with a wider-and-higher toe box, a stiffer sole and an anatomical footbed with a metatarsal button. One model that meets these specs is the Specialized BG, with versions for road and off-road.
   

• Purchase custom orthotics. These plastic footbeds are supplied by podiatrists or sports medicine clinics. Among their biomechanical benefits are built-in metatarsal buttons. Be certain the practitioner understands you're a cyclist, because orthotics for runners are not what you need. Cycling is a forefoot activity, not a heel-strike activity.

For more information on hot foot, orthotics and other foot-related issues, see "Andy Pruitt’s Medical Guide for Cyclists," available as an eBook in the online eBookstore at RoadBikeRider.com.

Receive a FREE copy of the eBook “29 Pro Cycling Secrets for Roadies” by subscribing to the RoadBikeRider Newsletter at www.RoadBikeRider.com. No cost or obligation!

[Back to top]

How to Choose Cycling Shorts

By Fred Matheny and Ed Pavelka of www.RoadBikeRider.com

You should choose road-cycling shorts based on the quality of materials and construction. But also crucial is how well they conform to your unique anatomy. Sometimes a relatively inexpensive pair may work better for you than a high-zoot model.

Shorts, like saddles, are tough to recommend because of differences in butts, crotches, seats and riding positions. Every rider has to try on shorts, buy the model/size that fits snugly but comfortably, then hope for the best on the bike. It's hit or miss, and some luck is involved. Just as with saddles, there is no universal answer.

That said, here are guidelines that'll point you toward better choices.

• Price. Generally, the more expensive the shorts, the higher the quality. Avoid cheap shorts because the material and construction may be substandard. They may be sewn from only 4 or 6 pieces ("panels"), which won't give you the best anatomical fit. The padded liner ("chamois") may not be large enough, soft enough or sewn without irritating seams. Cheap shorts aren't as durable, either, so in the long run they really aren't a bargain. When touring and washing shorts by hand, wringing can break threads and blow out seams if the manufacturer cut corners on quality.
   

• Panels. The more the better. Usually, 8-panel shorts conform to your body better than those made from fewer pieces. Better manufacturers use flat-seam stitching so additional panels won't result in abrasion or other discomforts.
   

• Liner. Crotch liners are synthetic nowadays (not real chamois leather). That's a good thing because the material can't dry, crack and cause more irritation than it prevents. A large, smooth, absorbent, one-piece, moderately padded liner has the best chance of feeling comfortable. Liners that have seams, grooves, distinct sections and/or a waffle-like texture may work fine for you -- or maybe not. There's no way of knowing for sure before riding. Beware of thick padding, which can bunch and chafe. Also problematic are gel inserts. Because they're in plastic compartments, moisture transfer can be blocked, causing excessive dampness and skin irritation.
   

• Leg length. This goes up and down like hem lengths in the fashion world. Long, so-called "Belgian" shorts will be in style for a while, putting the legs just above the knee. Then the pendulum swings the other way. Short shorts, like those marketed for spinning classes, are favored by riders who want to avoid tan lines that show when wearing casual shorts. But they shouldn't be so short that the nose of the saddle rubs on bare skin.
   

• Waist length. Proper cycling shorts are cut high in back to keep skin covered in the bent-over riding position. Likewise, they are low in front so you can bend forward without restriction. The front shouldn't be so low, though, that it's below your hip bones with nothing to help hold it up.
   

• Waist band. The elastic should be wide enough that it doesn't feel like a cord around your middle. Some manufacturers add a drawstring. Just elastic is fine. Just a drawstring is not. If that's the only thing keeping shorts in place, you'll feel restricted in certain positions or when breathing deeply.
   

• Leg grippers. Nothing is more frustrating than shorts that ride up and let material bunch in the crotch. Check the leg grippers to be sure they're wide, made of "sticky" rubber-like material and securely sewn in. The legs should feel comfortably snug, not tight.
   

• Stretch. Most shorts are made of a stretchy fabric generically called spandex. They're easy to pull on and don't feel like you're wearing a 19th century corset. On the other hand, you may come across shorts with fabric that purposely resists stretching. The idea is to provide help to your pedal stroke. The fabric "stores" kinetic energy on the rear part of the stroke and releases it when you push down. This concept is also used in competition suits for weight lifters. I'm not aware of any studies that prove a benefit for cyclists.
   

• Bibs. Shorts with built-in shoulder straps can't sag. They keep the chamois snug against the crotch to limit movement and irritation. For men, this prevents the chance of things moving out of place when pedaling out of the saddle. However, the high front makes it difficult for guys to urinate. (Some prefer to roll up one leg instead of contorting to pull down the front.) Women usually prefer shorts without bibs so they don't have to remove their jersey to take what cycling commentator Phil Liggett calls a "natural break." Bib shorts are more expensive than standard shorts.
   

• Size. It's best to try on shorts before buying them. Sizing varies among manufacturers. Fred is 5-foot-10 and just under 160 pounds, but wears size XL in some shorts while M is too big in others. Some U.S. manufacturers have noticed the "plumping of America" and cut their clothing bigger. It's risky to buy shorts by mailorder unless you're replacing a model and size you've worn before.
   

• Overall fit. In general, snugger is better. You don't want any uncomfortable restriction, but you do want the shorts to stay exactly in place. Remember that properly designed cycling shorts will look a bit baggy in the butt when you're standing in front of the dressing room mirror. Then crouch forward into the riding position and watch them mold to your body.
  
  Receive a FREE copy of the eBook “29 Pro Cycling Secrets for Roadies” by subscribing to the RoadBikeRider Newsletter at www.RoadBikeRider.com. No cost or obligation!

  [Back to top]

How to Find a 'Safe Saddle'

By Ed Pavelka of www.RoadBikeRider.com

Since the late 1990s, saddle design has seen major innovation.

A big impetus came from a prominent doctor's contention that sitting on a bike seat might lead to damaged nerves or blood vessels in some men. This risk, plus the occasional bout of temporary genital numbness that many riders experience, put designers into action.

The result is a new generation of saddles with special shapes, padding or cutouts to reduce crotch contact and pressure. As a side benefit, riders have found that they experience fewer saddle sores on these seats.

Saddle selection is highly individual. Despite how effective a saddle might look or how highly praised it might be by a riding buddy, there's no guarantee that it will be comfortable for you. You need to ride it to tell.

Here are some selection guidelines, followed by two things you must do to further reduce risks and discomforts: (1) develop a good riding position, and (2) use smart riding techniques.

Saddle Selection

Width. Squat and sit on a low stool or curb. What you feel supporting your weight is your ischial tuberosities, the points of the pelvis that are commonly called the "sit bones." These are what should support your weight on a saddle.

A seat that's too narrow will place your weight on the soft tissue between your sit bones -- for men, on the perineum where the penile nerves and blood vessels are located. Women also need to put a high priority on width because, on average, they have wider sit bones than men. Anatomically designed women's saddles are a bit wider in the main sitting area.

Curvature. Looked at from the rear at eye level, a seat should be flat or only very slightly domed. A significant curve causes your sit bones to be lower than the saddle's center, contributing to crotch pressure.

Dip. Looked at from the side at eye level, a seat should be nearly flat from nose to tail. A slight dip (say six degrees or less) is helpful to give you a feeling for the saddle's center while riding. More dip creates positioning problems. That is, when the nose is set level, the tail sticks up and may be uncomfortable to sit on; when the tail is set level, the nose goes up and exerts pressure right where you don't want it.

Padding. Some is good, more is not better. You want enough foam or gel to cushion your sit bones for comfort. Thick padding can actually increase crotch pressure because as your sit bones sink in, this has the effect of making the center press upward.

Special sections. These are what set the new generation of saddles apart. These sections range from gel-padded areas, to wedge-shaped cutouts, to holes through the top. Rider reactions to these innovations are all over the board. Do they lessen contact or pressure? No doubt. Do they absolutely, positively prevent numbness or worse problems? No saddle maker can guarantee that. Are they comfortable? It depends on whom you ask. The saddle that one rider swears by will be the same saddle the next rider swear at. There's simply no way of knowing until you ride on a given design. Some bike shops have a test ride program or will allow you to return a saddle that you simply can't stand.

Saddle Position

Please check our guidelines in the article, How to Perfect Your Riding Position & Technique. You'll find advice for setting saddle height, tilt and fore/aft location. Of course, don't stop at the saddle. Go though all of the steps to get an overall well-balanced riding position. If your saddle position is right but your handlebar position isn't, you still might run into problems.

TIP! For many guys, a saddle that's slightly off center (compared to the top tube) feels more comfortable. If the nose keeps pressing you in the wrong spot, try a bit of left or right angle. According to Andy Pruitt, Ed.D., who has refined the positions of many top cyclists, the right approach is always to make the bike fit your body instead of making your body fit the bike.

Riding Techniques

The rule is simple: Don't sit statically in one place for more than a few minutes. When you keep moving on the saddle, as well as on and off the saddle, you avoid constant pressure and compression. Blood keeps circulating, nerve transmissions keep flowing, and the risk of numbness is greatly reduced.

This is pretty easy to do off-road, where terrain changes and body English keep your crotch from locking into a set position. It's harder on a road bike unless you cultivate some good habits.

For example, get out of the saddle for at least part of every hill. Stand when exiting every turn or any other time you need to accelerate. Even just a few seconds is helpful when repeated often. On a ride in flat terrain, shift to a higher gear so you can stand and pedal out of the saddle for at least 30 seconds every 20 minutes. When sitting, keep your butt far enough back for your sit bones to be supported by the seat's wide rear section. Beware of the tendency to creep forward onto the nose and dwell there, especially when pushing hard or riding in a low position.

Other Pointers

If you use an aero bar, you'll tend to lock into a low, forward position for minutes on end. It's a nuisance, and it takes effort, to break this position to stand. But it's risky if you don't. Also, try to stay back on the wide area of the saddle. Tilting the nose down 1 or 2 degrees can reduce crotch pressure, but more will tend to make you slide forward onto the skinny nose.

Ride like a jockey when you come to anything rough. By leveling the pedals, flexing your knees and holding your butt an inch above the saddle, you'll avoid impacts that can cause bruising and pain. A shock-absorbing seatpost is another way to reduce the risk, but don't let it lull you into remaining seated all the time.

Carry stuff on your bike, not on your body. This isn't always possible, but realize that when you ride with a backpack, fanny pack or hydration system, you are adding weight to your seat. This makes a wide, supportive saddle even more important. The same goes if you're overweight.

Be smart when riding indoors. With no terrain changes or other natural opportunities to move your butt, you need to invent some. Pedal out of the saddle for one minute in every five. Consciously move to a different sitting area every couple of minutes. Keep sessions short and varied rather than long and steady. Using bigger gears lightens saddle pressure because your feet must push harder.

Wear high-quality, lightly padded cycling shorts. These, plus a skin lubricant such as Chamois Butt'r, increase comfort and reduce the risk of developing raw or tender spots. These can stop you from shifting position to all parts of your crotch and the saddle.

Receive a FREE copy of the eBook “29 Pro Cycling Secrets for Roadies” by subscribing to the RoadBikeRider Newsletter at www.RoadBikeRider.com. No cost or obligation!

[Back to top]

How to Choose a Bike Club

By Fred Matheny for www.RoadBikeRider.com

Cycling can be a solo sport. Long rambles through the spring countryside, hard rides in the hills, weekend tours to scenic areas—all can be enjoyed with only your own thoughts for company.

In fact, many cyclists prefer to go alone. Then they can choose their own route and are free to ride hard or stop and smell the flowers, as their fancy prefers.

But cycling is also the perfect group sport. Here are just five good reasons for riding with others:

• Part of the thrill of riding a road bike is drafting other cyclists in close proximity.

• A group lets you meet people, expanding your social horizons.

• Racing is inevitably a group activity, so if you plan to compete it’s almost mandatory to train with other racers at least part of the time.

• Small group rides are fast because you can share the work at the front. You can cover more ground during your training time.

• Small groups are safe because a pack of several riders is that much more visible to motorists. And if you have trouble of any sort, help is right there.

To get these benefits, it’s a good idea to join a bike club even if you ride alone much of the time due to preference or your schedule.

But if there are two or more clubs in your area, how do you know which one to join? It depends on what you want to do and how you want to do it. Are you interested in recreational rides or racing?

Get to know area cyclists and ask why they joined the club they did. Go to club events to watch the organization and feel the atmosphere. Sit in on a club’s monthly meeting to hear about issues and see what kind of people are at the helm.

Participate in club rides and tune in to the tenor of the group. Is it supportive or critical of other riders? Remember, if you enjoy cycling, you should enjoy it even more in the company of fellow riders. It pays to pick your club carefully.

Recreational/Touring Clubs

Most clubs are geared to promoting fun rides and tours. Here are some ways you can identify a club that’s doing it right.

• Good clubs offer a full schedule of weekend rides plus occasional longer tours.

• Good clubs grade rides in terms of distance, speed and ability so that newcomers don’t accidentally bite off more than they can chew. One sure sign of a poor club is when a ride rated “easy” turns into a race as the leader shows off his fitness and power.

• Good clubs have rides that encourage participation by the whole family. They sometimes sponsor low-key time trials (safe races against the clock) and encourage everyone to participate, regardless of fitness or skill.

• Good clubs have social gatherings like potlucks or “restaurant rides” that bring people together off the bike.

• Good clubs are active in politics. They support local and state bicycle advocacy organizations. They often are the force behind bicycle path construction, traffic ordinances that favor cyclists, and campaigns urging residents to reduce air pollution by commuting to work by bike.

• Good clubs sponsor a major yearly event, such as a century ride. These rides are well organized, safe, and promoted to the regional cycling community. Shorter distances will be included to welcome everyone, not just enthusiasts.

• Good clubs regularly publish a newsletter to keep members motivated and updated on rides and other events.

Racing Clubs

Some recreational/touring clubs have a racing division, while other clubs are strictly racing organizations. They exist to help talented cyclists achieve competitive goals. If you want to race, joining a good racing club is a key step toward realizing your potential.

Some clubs are geared to junior riders, some to masters, and others concentrate on Category 1-5 riders. If you find two or more clubs that seem meet your needs, make your choice using this criteria:

• A good racing club provides qualified coaching.

This may mean the coach is certified by USA Cycling (the governing body of U.S. bike racing), but many fine coaches don’t have formal certification.

Good coaches have time to work with young or inexperienced cyclists. They have the patience to bring beginning cyclists along slowly, letting them develop at their own rate without undue pressure.

Good coaches aren’t slaves to one coaching system. They don’t blindly follow some formula but instead devise training and racing strategies geared to individual cyclists.

• A good racing club has a comprehensive year-round program.

In the winter, riders meet for weight training and stationary bike work. They train together in the early season, doing long base-building rides. They practice team tactics on training rides and use them in races. They travel to events together, sometimes in a team van.

• A good racing club promotes races.

There’s usually a local time trial series and a weekly evening criterium in which members hone their skills for the real races on the weekend. These practice races are a good measure of the club. Look for events that start on time, are well organized and take place on safe-but-challenging courses.

Cycling is a relatively expensive sport, so good clubs work hard to secure sponsorships from non-cycling companies as well as from the industry and bike shops. These sponsorships help cover the cost of clothing, equipment and travel. Shops also may offer parts and service discounts to club members.

• A good racing club offers a friendly, supportive environment despite the emphasis on competition.

Team members encourage each other with advice and consolation. (One sure sign of a poor club is people yelling at each other on training rides, dispensing criticism instead of support.) Training rides should be designed to help everyone improve. Race strategy should be based on teamwork rather than on showcasing star athletes.

Receive a FREE copy of the eBook “29 Pro Cycling Secrets for Roadies” by subscribing to the RoadBikeRider Newsletter at www.RoadBikeRider.com. No cost or obligation!

[Back to top]

How to Hold Your Own on Fast Club Rides

By Fred Matheny for www.RoadBikeRider.com

The major activity of any cycling club, racing or touring, is the group ride. As a result, it’s important to know how to hang tough on a given ride and make yourself welcome on the next one. Success is often due to more than fitness.

Here’s a club cycling primer!

• Know the group's traditions.

Some clubs like to start all rides, no matter how fast they’ll eventually become, with 20 or 30 minutes of easy warm-up. If you’re impatient early, you can cause hard feelings by chafing at the bit to go faster. When you know the pattern, it’s easier to be patient.

• Know what kind of ride is planned.

Will it be a fast training ride? A leisurely spin? Paceline practice? It’s disruptive when most of the group is thinking one thing while one or two cyclists are on a different agenda. If an easy recovery ride is scheduled, but you're out for hard training, people are going to get angry. Be certain of the ride’s goal before the start.

• Don’t be a loco locomotive.

If you're having trouble taking your pulls at the front, get off quickly and slide back to get maximum draft in the paceline. It's far better to sit on the back and let others do the work than to slow everyone with valiant but sluggish turns at the front.

• Use a racing trick if you often get dropped on climbs.

As a climb begins, be nestled in the front third of the bunch. Get as much draft as possible. If you can’t hold the pace, don’t blow up trying. Let yourself slide back through the group but still be in contact at the top.

• Accept help on hills.

Stronger cyclists may give you a helpful push as they ride by. Don’t be embarrassed by their help. They probably got towed up climbs when they were starting, too. A short push often allows you to regain your breathing and climbing rhythm so you can continue on your own.

• Pick a strong rider to follow.

If you're really having difficulty keeping the pace, get on the wheel of a good rider and mirror his (or her) technique. Use the same gear, stand when he does, take a drink as soon as he reaches for his bottle, and so on. This teaches you good cycling habits. Plus, emulating his movements takes your mind off your own effort and helps you past the hard spots.

• Don’t be afraid to say the pace is too hard.

It’s a good bet that other cyclists feel the same way but are reticent to speak up—or can’t, because they’re breathing too hard to talk! Perhaps even the riders who are setting the pace are having difficulty, but they continue to go hard out of vanity or because they think everyone else expects them to. A little communication goes a long way in making a group ride a more pleasant and productive experience.

• If you always have trouble holding the pace, look for different group.

Find one closer to your ability level. There’s no shame in rationally assessing your strength and choosing cyclists who share it. You’ll actually improve faster if you ride with a group that you are on equal terms with. You’ll be able to practice paceline cycling, following a wheel, riding in close quarters, cornering in a group, and other important skills. 

• Don’t let group cycling hurt your progress.

Frequently riding with a too-fast group will make you tired. You won’t improve as rapidly as you might with more rest. A pace that’s too fast will hurt you mentally, too. You’ll begin to associate cycling with pain, misery and disappointment. Don’t let your ego overpower your better judgment. An appropriate dose of humility now will pay dividends later.

Receive a FREE copy of the eBook “29 Pro Cycling Secrets for Roadies” by subscribing to the RoadBikeRider Newsletter at www.RoadBikeRider.com. No cost or obligation!

[Back to top]

How to Survive Road Hazards

By Fred Matheny and Ed Pavelka of www.RoadBikeRider.com

Cycling is a unique sport because its arena is the open road. That’s the same place frequented by traffic, potholes, snarling dogs and absentminded pedestrians.

But sometimes we’re our own worst enemy. Inattention and poor technique can put us on the pavement as fast as any hazard. Use these tips and you’ll be less likely to take a tumble.

• Always ride with your head up. While cruising along, it’s tempting to stare at the whirling pattern of the front spokes or fixate on your cyclecomputer’s numbers. A momentary downward glance that lasts just a second too long can mean riding into a problem that could easily have been avoided.

• Focus. The smooth and rhythmic motion of pedaling can have a hypnotic effect. Daydreaming cyclists have crashed into the back of parked cars, wandered far into the traffic lane or blithely ridden off the road. Don’t let yourself be separated from the outside world by the vivid canvases created by your imagination. Keep your head in the game.

• Keep your bike in top mechanical condition. Repair or replace faulty parts sooner rather than later. It’s a loser’s game to milk “just one more ride” out of worn brake pads, a frayed cable, or tires with a threadbare tread or bulging sidewall. Your first line of defense against the challenges of the real world is a bike with all parts in good working order.

Punctures

It’s every rider’s fate to flat. But it’s relatively easy to limit the frequency.

• Choose your line with care. The best way to avoid punctures is also the easiest: Steer around broken glass, road rubble and potholes.

• Use tires with a Kevlar belt under the tread. Kevlar does a good job of stopping nasty things from penetrating. Inspect the tread after every ride for embedded debris. Remember, most punctures are caused by something sticking to the tread and working through during numerous wheel revolutions. Replace tires before they become so thin that they’re virtually defenseless against pointy things.

• Check inflation pressure every couple of days. Tubes are slightly porous and may lose several pounds of pressure each day. Soft tires slow you down, corner poorly, wear fast, and don’t protect your rims against metal-bending impacts.

Potholes

Hitting potholes can bend your rims beyond repair. If the chasm is deep enough, it will send you hurtling over the handlebar when you bury the front wheel and the bike suddenly stops. Here’s a primer on pothole evasion.

• Note where potholes lurk on your normal training routes. Plan your line well in advance to avoid them. Don’t expect the road to be in the same condition every day. Potholes have a habit of sprouting up out of nowhere, especially in the winter and early spring due to the daily freeze/thaw cycle.

• Treat potholes like glass.  Ride around them, first checking behind for traffic. Be mindful of riding partners when you change your line. Newly minted pot­holes present a double hazard—the chasm itself, and the chunks of shattered pavement around it. If the pothole doesn’t bend your wheel, the sharp bits of rubble might puncture your tire. Give these highway craters a wide berth.

• Jump your bike over a pothole, if you have the skill and are unable to ride around it because of traffic or adjacent riders. Learn this move on a grassy field. Level your pedals, crouch off the saddle, then spring up and lift with your feet and hands. Start by jumping over a line on the ground, then graduate to higher but forgiving objects such as a rolled-up towel or a shoebox.

Railroad Tracks

Unlike most dangers, tracks can’t be ridden around. You can suffer an instant crash if your tires slip on the shiny steel rails. Ride with extreme caution and follow these safety tips.

• Slow down! Tracks are rough, and even if you don’t crash you could get a pinch flat. This happens when you ride into something abrupt, like a rail, and it pinches the tube between the tire and rim, slicing two little holes in the tube.

• Rise slightly off the saddle. Have equal weight on your hands and feet. Let the bike chatter beneath you. Use your flexed arms and legs as shock absorbers.

• Cross tracks at a right angle. If the rails are diagonal to the road and you cross them at an angle, your front wheel can be twisted out from under you. A perpendicular passage is essential in the rain. Wet metal tracks are incredibly slippery. The slightest imbalance or abrupt move can send you sprawling.

• Jump if you’re real good. Racers who need to cross tracks at maximum speed will jump them. They use the same technique that works for potholes, but with more speed and lift because they must clear two rails. Coming down too early means the rear wheel will hit the second rail, guaranteeing a ruined rim or a pinch flat. In most cases, jumping isn’t worth the danger. It’s better to slow down, square up, and creep across.

Additional Slick Spots

• Painted lines. These can be slippery, especially the wide markings for pedestrian crossings at intersections. The paint fills in the asphalt’s texture, producing a surface that’s uncertain when dry and deadly when wet. The danger is worse when the paint is new.

• Dry oil slicks.  These may be nearly invisible, but you can spot them as darker streaks on a gray pavement. Be real careful in corners. You aren’t safe if you ride through oil on the straights. The greased tread might slip in a corner just ahead.

• Wet oil slicks.  If it rains, a small oily patch can grow until it covers the whole lane. Be on the lookout for the telltale multi-colored water. There’s no pot of gold at the end of this rainbow, only a black-and-blue meeting with the pavement.

• Wet metal. If it’s been raining and you come upon anything metal in the road (manhole cover, steel-deck bridge, road-repair plate), it’s as treacherous as riding on ice. Cross it with the bike absolutely upright. Even a slight lean can cause the wheels to slip. Smart riders walk their bikes across wet steel bridges.

• Wet leaves. Be very careful in the fall, or you will. Even if the road is dry, there can be moisture trapped between leaves littering the pavement. When you see leaves in a corner, slow down and round the bend with your bike upright, not angled.

• Sewer grates. Some old ones have bars that run parallel to the street and are wide enough to let a bike wheel fall through. If this happens, you can look forward to plastic surgery and possibly a lifetime of lawsuit riches. Many municipalities have replaced such grates with bicycle-friendly versions, but be careful in case a town hasn’t gotten the message yet.

Receive a FREE copy of the eBook “29 Pro Cycling Secrets for Roadies” by subscribing to the RoadBikeRider Newsletter at www.RoadBikeRider.com. No cost or obligation!

[Back to top]

How to Deal With Bad Dogs

By Fred Matheny and Ed Pavelka of www.RoadBikeRider.com

Dog attacks are high on the list of cycling fears. Maybe you can’t stop Fang from giving chase, but you can outsmart him if you know how dogs think—assuming that stinkin’ mutt even has a brain! 

• Know dog psychology. The majority of dogs who chase cyclists are merely defending their territory. When you pedal off the section of road that they consider their turf, you no longer pose a threat to their ancestral instincts and they lose interest. Incidentally, this is why you’ll rarely be chased by a dog you encounter way out in the boonies. He’s not on his turf so he couldn’t care less about you.

• Know dog tactics. Dogs want to attack from the rear, coming up from the hindquarter. Even one who sits up in his yard ahead of you may wait till you pass before giving chase. You can use this to your advantage in the next tip because it gives you a head start.

• Sprint! You often can outsprint Fido when he’s more interested in fooling around than in actually attacking. You can tell his intent by how hard he’s running and his expression. An easy gait with woofing and ears and tail up, no problem. A full-out sprint with ears back, tail down and teeth out, problem. Still, the territorial gene can save you. If the road is flat or downhill, stand up and sprint to get past the dog’s invisible boundary.

• Guard your front wheel. When a dog sees you coming, he might make a beeline for your bike, then attempt to turn up beside you. The danger here is that his poor little paws will skid on the pavement and he’ll plow into your wheels. If he hits the front one, you’ll crash. Sprint so that you move forward faster than he expects, and give him a margin for error by steering farther into the road—if traffic permits!

• SCREAM! Most dogs know what happens when a human is angry with them. A sudden shout of “No!” or “Git!” or “Stay!” will surprise Fluffy and probably make him hesitate for just the second you need to take the advantage. If he’s hard of hearing, raise your hand threateningly as if it contains a rock. Outlaw mutts usually have had experience with bad things flying at them when a human makes a throwing gesture.

• Play douse the Doberman. If you see big, fast Prince up ahead and know that he sees you, sprinting might not work. Especially if the road is tilting up. Take out your water bottle. Just having it in your hand may make him stay away. If he does come near you, give him a faceful and a loud yell. This distraction will slow him down, though he may come back for more. Just don’t distract yourself and ride off the road.

Some riders swear by Halt pepper spray that they clip to their handlebar. This stuff works great—if you hit your target. That’s a big if when you and Spot are going different speeds, the air is moving, and you’re trying to stay on the road. Pepper spray stings a dog’s eyes, nose and mouth, but it doesn’t cause lasting damage. It also works on human attackers, but that’s a different story.

• Give up and get off.  If nothing works and Toodles has the upper hand, dismount quickly and hold your bike between you and those sharp teeth. Swing it like a weapon if necessary, and start calling for help. Someone may eventually come out of a house and yell, “Oh, he won’t hurt you!”

• Call the cops. If you are attacked and bitten, report it to the county sheriff or other authority immediately. Include the location, a description of the dog and the owner’s name and address if you know them. Get medical attention without delay. If the dog was rabid, you are at risk of serious illness or even death. Demand proof of rabies vaccination or insist to authorities that the dog be quarantined.

If the same dog accosts you every time you ride the road, report this to the authorities, too. You have a right to use public roadways free from fear for your life, liberty and pursuit of cycling happiness. Keep following up with calls to make sure steps are taken to put PupPup on a rope.

Receive a FREE copy of the eBook “29 Pro Cycling Secrets for Roadies” by subscribing to the RoadBikeRider Newsletter at www.RoadBikeRider.com. No cost or obligation!

[Back to top]

How to Perfect Your Riding Position & Technique

By Ed Pavelka of www.RoadBikeRider.com

Cycling is full of prodigious numbers—the distances ridden, the calories consumed, the tires trashed. Another statistic that can seem astounding is the number of pedal strokes made.

Let’s suppose it takes you six hours to ride a century and you pedal at the rate of 90 rpm throughout. As you cross the finish line, you will be making pedal stroke number 64,800.

Whoa, that’s a lot! But it barely registers on the scale of what happens during a full season. For example, during the year in which I had my biggest mileage total, I figure that I got there by pushing the pedals around approximately 13,340,000 times.

Can you say, repetitive use injury? You can see why cyclists are good candidates, especially if we aren’t pedaling from a nearly perfect position.

Your body and bike must fit together and work together in near-perfect harmony for you to be efficient, comfortable, and injury-free. The more you ride, the more essential this is. If even one thing is out of whack, it’s a good bet that it will cause a problem during thousands of pedal strokes.

Fortunately, it isn’t difficult to arrive at an excellent riding position. But it does take time and attention. You need to be careful with your initial bike set-up, then conscientiously stay aware of your body and the need for occasional refinements. As time goes by, your position will stabilize and you’ll be riding in a smooth groove.

The following guidelines come from my experience and the advice of various experts. One is Andy Pruitt, Ed.D., the director of Colorado’s Boulder Center for Sports Medicine. Andy has probably solved more position problems than anyone during his years of work with elite cyclists.

As you work on your riding position, always remember Pruitt Rule No. 1:

“Adjust your bike to fit your body. Don’t force your body to fit the bike.”

• Frame: Measure your inseam from crotch to floor with bare feet 6 inches apart, then multiply by 0.68. The answer is a good approximation of your road frame size, measured along the seat tube from the center of the crank axle to the center of the top tube. As a double check, this should produce 4 to 5 inches of exposed seatpost when your saddle height is correct. When the crankarms are horizontal, the top tube should be right between your knees when you squeeze them together.

• Arms: Keep your elbows bent and relaxed to absorb shock and prevent veering when you hit a bump or brush another rider. Hold arms in line with your body, not splayed to the side, to be more compact and aerodynamic.

• Upper Body/Shoulders: Don’t be rigid, but do be fairly still. Imagine the energy wasted by rocking side to side with every pedal stroke on a 25-mile ride. Save it for pedaling. Also, beware of creeping forward on the saddle and hunching your shoulders. There’s a tendency to do this when pushing for more speed. Shift to a higher gear and stand periodically to prevent stiffness in your hips and back.

• Head and Neck: Resist the temptation to put your head down when you’re going hard or getting tired. It takes just a second for something dangerous to pop out of nowhere. Occasionally tilt your head to one side and the other instead of holding it dead center. Change your hand location to reposition your upper body and give your neck a new angle.